Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

• The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
• It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
• The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
• The gate or door stops movement and will then reverse the direction of travel.
• Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
• Response time: nominal 30msec.
• Opertating temperature: 0 to 130F
• Operating frequency: 318Mhz
• Maximum operating distance: 100ft
• Replaces MWT02

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

• The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
• The light beam is intended to function as a protective line guarding a potentially hazardous zone.
• When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
• Universal Design Works with Pre and Post 2010 Operators
• Spans Distances up to 30 feet (model dependent)
• Time Saving Installation
• Vertical or Horizontal Mounting
• Easy Alignment with Positioning Indicators
• UL325 Compliant for Doors and Gates
• NEMA 4 enclosure
• Impact Resistant for rugged environments
• Easily Replaceable Batteries (no special order)
• Enhanced Sun Guard Protection
• Built in Strain Relie

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

• The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
• The light beam is intended to function as a protective line guarding a potentially hazardous zone.
• When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
• Universal Design Works with Pre and Post 2010 Operators
• Spans Distances up to 50 feet (model dependent)
• Time Saving Installation
• Vertical or Horizontal Mounting
• Easy Alignment with Positioning Indicators
• UL325 Compliant for Doors and Gates
• NEMA 4 enclosure
• Impact Resistant for rugged environments
• Easily Replaceable Batteries (no special order)
• Enhanced Sun Guard Protection
• Built in Strain Relief

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

• Flexible spring loaded pedestal stand
• 30 degree of flex
• 27" high from bottom base to photoeye

Miller Edge Wall Mount Extension Bracket

• 1 ft L x 2" H x 3" W

Miller Edge Protective Boot Covering for IG2 Eyes Sold as a Pair

Miller Edge Non-Monitored End Plug Kit *** Discontinued

• For use with CPT-210-50 bulk extrusion
• Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot *** Disc. Repl by ME210-C3

• Used on CPT-210 extrusion

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

• €¢The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
• Power requirements: 10 to 40 VDC 10-30 VAC
• Output: dry relay contact N/O and N/C 1A @60VAC
• Operating temperature: -40C to 60C
• Maximum operating distance: 100ft
• Electrical configuration: optional N/O or N/C
• System response time: transmitter input to receiver
• Two year warranty
• For 2 wire edges
• Replaces the MWR02A

Miller Edge MEL Transmitter 315 MHz 2nd Generation

• MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices