Page 1 of 860 (10 total items)
LiftMaster Receiver Logic Board Kit Sec+ 3.0
  • 030DCT is a Receiver Logic Board Replacement Kit for Security + 3.0 Garage Door Openers.
  • The unit will feature a white learn button.
  • Compatible with LiftMaster residetial Garage Door opener models: 2100 2300 2220L 2420L 6580L 4690L 6690L
  • This circuit board is covered by a one year warranty

Login to view pricing

Login
Manaras Trolley Operator 1 HP 208V 3 Ph monitored w/N1 Eyes
  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain

Login to view pricing

Login
Steel Bumper Extension Bracket 4"D x 20" Tall 12"W
  • 4" deep (projection) x 20" tall x 12" wide

Login to view pricing

Login
Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand
  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"

Login to view pricing

Login
Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand
  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • Includes PHOTO-061 Nema4

Login to view pricing

Login
Manaras Opera-SH w/Carwash Mod 3/4HP 575V 1Ph Mon ECB w/N4 Photoeyes Right Hand
  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • Includes PHOTO-061 Nema4

Login to view pricing

Login
Manaras Opera-SH w/Carwash Mod 3/4HP 575V 1Ph Mon ECB w/N4 Photoeyes Left Hand
  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • Includes PHOTO-061 Nema4

Login to view pricing

Login
Extruded Bumper Black 36" L x 4 1/2" W x 3 3/4" H w/Metal Insert
  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
  • 3 holes

Login to view pricing

Login
Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount
  • The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
  • LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
  • With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
  • The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
  • Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles

Login to view pricing

Login
Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Left Hand
  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • includes damp area modification
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection

Login to view pricing

Login
Page 1 of 860 (10 total items)