Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

• Prox.padâ„¢ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
• The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
• The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
• The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
• By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
• The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
• *LAN/WAN connectivity requires the purchase of the LAN/WAN device Model: SEG-

Automatic Systems 5/8 Right Hand Rod End with Zerk

• Used on the BL229 gate op.

Automatic Systems 5/8 Left Hand Rod End with Zerk

• Used on the BL229 gate op.

LiftMaster Crank Link Barrier Gate

• Also known as: K07-8005 G078005
• For use with various LiftMaster® Barrier Gate Operators

LiftMaster Crank Link BG790

LiftMaster Chain Guide Tray for SL595

• The tray located between the 2 chain guides.
• Chain guides are not included.

LiftMaster Gate Bracket

• Fits SL580GL SL595GL and new IHSL24UL INSL24UL models

LiftMaster Replacement Plate for Control Panel BG790

• Also known as: K10-8026 G108026 108026

LiftMaster Counterweight Clamp for BG790

• Also known as: G108055

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

• Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

FAAC 400 Hydraulic Swing Gate Operator 115V Reburbished

• Refurbished unit.
• Tank body

Linear Gate Safety Edge Transmitter

• 105104 is for adding obstacle sensing for motorized gates or barrier arms.
• Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
• The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
• Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
• Activates receiver for stop or reverse entrapment
• No cables or coiled wires
• Mounting hardware (4 screws) supplied
• Power: 9-volt battery
• Codes: 1024 (set by dip switches)
• RF frequency: 310 MHz
• Dimensions: 4.28" W x 2.875" H x 2.25" D
• Same as: MCS105104

FAAC Gearmotor for Sliding Gates Model 844 230V 1p

• Gearmotor for sliding gates with max. weight of 1800 kg 844 ER Z16 for rack applications
• Ideal for commercial and industrial applications
• Anti-crushing safety
• As the gearmotor is non reversing no electric locks need be installed
• In the event of power failure the key-operated release device makes it possible to open and close the gate manually
• Twin-disk clutch in oil-bath
• Inductive or magnetic travel limit (according to model). Use: Condominium/Industrial

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

• Used on slide gate operators using #50 chain.
• Also referred to as adjuster bolts

LiftMaster Idler Shaft (1)

• Fits SL595
• Two are required per operator

Secure Brands Keypad with Intercom Post Mount

• Post mount with Intercom
• RemotePro KP 26 bit wiegand output keypads
• Available in three different mounting configurations: post single gang or flush.
• All single gang RemotePro KP models are available with a silver aluminum faceplate.
• A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
• Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.

Spare Key for American Access Keypad

• Spare key only for model 12-000I

LiftMaster Flanged Ball Bearing 1-1/4" Bore **to extent of inventory

• Fits SW490GL swing gate

Flanged Bearing 1-1/4" x 1/8" **to extent of inventory

• Fits SW470 gate operator

Flange Mount Bearing Self-Aligning

• Works with SL575 SL580 SL585 SW470.SW470 gate operator
• Same as K12-4164 124164