Page 1 of 860 (10 total items)
Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot
MC22-2WIRE-LH-G
Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot
  • €¢Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty
Worksheet

Login to view pricing

Login
Miller Edge Funny Flaps for MC22 Sold as a Pair
MEFF-PAIR
Miller Edge Funny Flaps for MC22 Sold as a Pair
  • Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
  • They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

Login to view pricing

Login
Miller Edge Monitored Edge Link-II Transmitter
MEL-II-TX10
Miller Edge Monitored Edge Link-II Transmitter
  • Miller Edge Monitored Edge Link II TRANSMITTER ONLY
  • Monitors the presence and function of any 10K (T2) monitored sensing edge
  • Provides a monitored wireless signal transmission from the sensor to the operator controls
  • Improved immunity to RF interference with 916 MHz operating frequency
  • Eliminates visible coil cords and retracting reels
  • Saves installation time
  • Aesthetically pleasing appearance free of dangling wires
  • Standard AA lithium batteries simplify replacement and withstand extreme temperatures
  • Dimensions (TX): 1.75"W x 4.62"H x 1.75"D

Login to view pricing

Login
Miller Edge MU22 Custom Made Edge
MU22-CUSTOM
Miller Edge MU22 Custom Made Edge
  • Edge made to customer's exact specifications
WorksheetInstallation manualSell sheet

Login to view pricing

Login
Miller Edge Air Wave Kit 18ft No Coil Cord
AW14K500-18
Miller Edge Air Wave Kit 18ft No Coil Cord
  • AW14 18ft. of RAH-500 P-50H 218-27-18 P50
  • Kit Includes: AW14 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Login to view pricing

Login
Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued
AW12K500-12
Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued
  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Login to view pricing

Login
Miller Edge Air Wave Kit 18ft No Coil Cord
AW12K500-18
Miller Edge Air Wave Kit 18ft No Coil Cord
  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Login to view pricing

Login
Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output
PG-K-R50
Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output
  • Prime Guard's rugged housing is suitable for both indoor and outdoor installations.
  • Dimensions: 5.1" H x 2.8" L x 1.8" W
  • Weight (Em): 12.2 oz. (Em)
  • Weight (Rx): 11.2 oz. (Rx)
  • Aluminum enclosure
  • Mounting options: Wall floor post
  • Detection Technology: Infrared thru-beam
  • Operating Temp. Range: -40°F to 185°F
  • -40°C to +85°C
  • Wavelength: 850 nm
  • Response Time: < 18 msec
Sell sheet

Login to view pricing

Login
Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA
MIRM-T2
Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA
  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • If the beam is blocked the control unit signals the door operator to stop and/or reverse.
  • It is also available in fail safe wiring configuration (MIRF-T2).
  • Kit includes: Sender Receiver Telescopic Leg Kit 15 Feet Coil Cord and Junction Box with Cover

Login to view pricing

Login
Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued
MIRM-T2-50
Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued
  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • If the beam is blocked the control unit signals the door operator to stop and/or reverse.
  • It is also available in fail safe wiring configuration (MIRF-T2).
  • Kit includes: Sender Receiver Telescopic Leg Kit 15 Feet Coil Cord and Junction Box with Cover

Login to view pricing

Login
Page 1 of 860 (10 total items)