Linear 8ft Belt & Inner Slide Assembly (HBT8)

Linear Pulley & Bracket Assembly - Belt (HBT)

Linear Safety Beam Set *** No Longer Available

• Set includes: Sender and Receiver photocells wire and connectors
• Safety beams will work with all Linear operators that currently have safety beams installed.

Overhead Limit Module RSX

Doorlec Clutch Assembly for ETBH

Miller Edge Bulk Extrusion 50' roll

• For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
• Sensivity: 15lbs max activation
• Lead wire 18"-22 gauge unversal
• Wire configuration: N.O.
• Electrical interface: sealed module- provides seamless connection to logic or relay type operators
• ANSI/UL325 recognized component

Miller Edge Junction Box Metal

• For commercial overhead doors that use coil cords or retracting reels
• Standard metal junction box with cover
• Includes 1 x 90-degree connector 1 straight connector
• Includes strain relief + 2 wire nuts + pop-out holes
• For single-angle bottom bar of rolling steel door
• Also compatible with sectional door

Miller Edge Patriot 2 Photo Eye Fail Safe 30ft Non-Contact

• Meets current UL325 standards for commercial door and gate operators*
• Thru Beam technology minimizes false reflective signals
• Travels with the door
• Easy to Align
• No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
• Convenient - Assemble and install in the field
• NEMA4 enclosure provides added protection from water spray dirt and dust
• Self Monitoring circuitry
• On Board diagnostic assist with troubleshooting
• Special note: *Applies to select models only when used as a primary entrapment protection device with a UL325-2010 Listed CDO

Miller Edge Patriot 2 Photo Eye Fail Safe 50ft Non-Contact

• Meets current UL325 standards for commercial door and gate operators*
• Thru Beam technology minimizes false reflective signals
• Travels with the door
• Easy to Align
• No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
• Convenient - Assemble and install in the field
• NEMA4 enclosure provides added protection from water spray dirt and dust
• Self Monitoring circuitry
• On Board diagnostic assist with troubleshooting
• Special note: *Applies to select models only when used as a primary entrapment protection device with a UL325-2010 Listed CDO

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

• Attaches directly to a Sectional door.
• The photo eyes travel below the door during the closing cycle.
• Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
• The Patriot2 non-contact system consists of thru beam photo optics.
• Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
• The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
• If the beam is blocked the control unit signals the door operator to stop and/or reverse.
• It is also available in fail safe wiring configuration (MIRF-T2).
• Kit includes: Sender Receiver Telescopic Leg Kit 15 Feet Coil Cord and Junction Box with Cover