Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

• Works on GH/GHX

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

• This limit shaft will work on all Side-Mount Doorlec Openers
• Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

• Fits the older smaller boxes

Doorlec Cam Shaft 11-1/4" x 5/8" (28.575 x 1.59cm)

• Fits the new larger box

Doorlec Cam Shaft Threaded 5/8" x 7-1/4" w/Sprocket GHX

• Explosion Proof rotary shaft 1.59cm x 18.4cm

Doorlec Shaft 9-3/4" x 5/8" Keyed LJ / LJH

Bircher ProLoop 2 Dual channel loop detector 24 AC/DC Din-Rail

• 2 Independent Loop Inputs for dual-lane detection or differentiated entry/exit monitoring
• Two Configurable Relay Outputs: Allows integration with control systems for gate/door activation alarms or signal switching
• Alarm Output: Enhances safety by dedicating fault outputs or loop error detection
• Intuitive interface allows for a simple and fast setup Ideal for vehicle access control for gates barriers and parking systems
• 24V AC/DC input voltage
• Din-Rail mount

Linear Cold Weather Package 230V SLC gate Op. Only

• Cold weather package includes: Arctic oil Heater Cogged V-belt

Linear Cold Weather Package 230V SLR gate Op. Only

• Cold weather package includes: Arctic oil Heater Cogged V-belt

Linear Cold Weather Package HSLG 230V

• Factory Option 2650-112-11 Cold Weather Package for 230-volt HSLG
• Package includes: Arctic Oil Heater Cogged Belt
• This factory option is only available for purchase when buying your gate operator.

Linear HSLG #40 Chain 46 Feet

• Purchased in conjunction with a gate opener

Doorlec Drive Shaft 1" x 19" Stress-Proof SGP

Genie Idler Pulley for Stealth Chain Drive

• Fits Genie Stealth model
• 1/4” bore
• Channel style rails

Genie Chain Pulley

• Front idler pulley for full chain models ie..PMX500
• Fits a T-rail
• Diameter: 2-3/8"
• 7/16” bore
• For use with t-style rails

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

• These panels are cut to an extra wide width to fit wider vehicle applications.
• Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
• These panels are routed and shipped without holes.
• 3/4" thick 7 ply exterior grade medium density plywood.
• Painted white
• Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.
• Curbside hardware shipped loose

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

• These panels are cut to an extra wide width to fit wider vehicle applications.
• Interlocking tongue and groove design for weather-tight joint and proper alignment.
• 3/4" thick 7 ply exterior grade medium density plywood. Primer finish

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

• These panels are cut to customer's specifications
• Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
• These panels have no routs and shipped without holes.
• 3/4" thick 7 ply exterior grade medium density plywood.
• Painted white
• Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

• These panels are cut to customer's specifications
• Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
• These panels have no routs and shipped without holes.
• 3/4" thick 7 ply exterior grade medium density plywood.
• Painted white
• Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

• These panels are cut to an extra wide width to fit wider vehicle applications.
• Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
• These panels have no routs and shipped without holes.
• 3/4" thick 7 ply exterior grade medium density plywood.
• Painted white
• Comes only with bottom retainer and seal (installed)

Truck Door Bottom Panel with Seal (12" x Cut-To-Size) Painted White for Whiting Dryfreight

• These panels are cut to an extra wide width to fit wider vehicle applications.
• Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
• These panels have no routs and shipped without holes.
• 3/4" thick 7 ply exterior grade medium density plywood.
• Painted white
• Comes only with bottom retainer and seal (installed)