Chain Tensioner for 1"-1" Shafts Inside the Box

• Chain spreader for installation with 1" operator shaft & 1" door shaft.
• Includes 2 shaft collars and set screws.

Wheel Chock MWC-32 Rubber with Eye Hook

• Good stability over others in this class
• Long Lasting 80 Durometer rubber
• Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

• €¢The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
• Power requirements: 10 to 40 VDC 10-30 VAC
• Output: dry relay contact N/O and N/C 1A @60VAC
• Operating temperature: -40C to 60C
• Maximum operating distance: 100ft
• Electrical configuration: optional N/O or N/C
• System response time: transmitter input to receiver
• Two year warranty
• For 2 wire edges
• Replaces the MWR02A

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

• Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
• Output: N.O. N.C
• Wire connections: Integral 18” wiring with #6 spade lugs
• Antenna: Attached wire or F connector
• LED Indicators: Power channel 1
• Polycarbonate enclosure
• Dimensions: 3-3/4”W x 4-13/16”H x 1-1/4”D (95 x 122 x 32 mm

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

• For 2-wire edges
• Was previously MWRTA02A now has a new board making installation easier
• Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
• This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
• The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

• The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
• It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
• The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
• The gate or door stops movement and will then reverse the direction of travel.
• Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
• Response time: nominal 30msec.
• Opertating temperature: 0 to 130F
• Operating frequency: 318Mhz
• Maximum operating distance: 100ft
• Replaces MWT02

Miller Edge Transmitter Binary Nema 4 Enclosure

• The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
• It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
• The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
• The gate or door stops movement and will then reverse the direction of travel.
• Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
• Response time: 70 milliseconds
• Opertating temperature: 0°F to 130°F (-18°C to 55°C)
• Operating frequency: 318Mhz
• Maximum operating distance: 100ft
• Coding: Selectable 9 pole 2 position DIP switch
• Power Source: (2) 1.5 volts AA alkaline batteries
• Input/Output: Input: 2-wire N.O. sensing edge
• Repl.: MWT12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

• The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
• It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
• The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
• The gate or door stops movement and will then reverse the direction of travel.
• Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
• Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
• Response time: 30 msec.
• Operating temperature: -4 to 140F
• Operating frequency: 318Mhz
• Maximum operating distance: 100ft in optimal conditions
• Two year warranty

Miller Edge Transmitter with Low Battery Alarm Small

• The transmitter comes standard with a NEMA 4 weather-proof enclosure
• Compact design that allow for easy troubleshooting.
• The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
• Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
• Power Source: (2) 1.5 volts AA lithium batteries
• Input: 2-wire N.O. sensing edge
• Demensions: 1-13/16”W x 5-3/4”H x 2-1/8”D (46 x 146 x 54 mm)
• Enclosure: Polycarbonate
• Low Battery Alert: Alarm; 80-95 dB at 2’

Micanan TEFC Motor Upgrade Modification

• TEFC motor upgrade for 1-phase belt drive operators

Micanan Trolley Arm Assembly

• Kit includes: MM-00031 wall L-bracket (1) MM-00032 trolley arm 105 degrees (1) MM-00033 trolley extension arm (1) MM-00034 trolley arm sliding bracket (1) MO-00004 trolley arm compression spring (1) and MR-00009 red rope c/w handle and warning label (2)

Micanan Complete Hoist Shaft Assembly for PRO-GH Includes Pocket Wheel

• Includes: pocket wheel shaft bevel gear chain guide spring collars spring pin and washers

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - Old Style

• Replaces MX00140-110V

Micanan Brake Assembly for PRO-HHD Solenoid NOT included

• Solenoid sold separately

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

• Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

• Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

• Complete brake assembly including 460V solenoid
• Solenoid cover is sold separately # MM00011

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

• Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

• Brake assembly does NOT include the solenoid

Micanan Brake Assembly for PRO-J/H 120V Solenoid included