Search Results - Devanco Canada

Page 1 of 430 (20 total items)

Jump to page:

Loop Sealant Cartridge Black 29oz

LSBLK

Loop Sealant Cartridge Black 29oz

Also available in grey (LSGRY)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

Login to view pricing

Loop Sealant Cartridge Grey 29oz

LSGRY

Loop Sealant Cartridge Grey 29oz

Also available in black (LSBLK)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

Login to view pricing

Loop Sealant Gun for Quart Sized (32oz) Tubes

LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

Caulking gun for LSBLK / LSGRY

Login to view pricing

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

LT100HLTB3815

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

Sensor Light Transmitter with LED
M12 High Power 15M Cable

Login to view pricing

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light (12 Red 12 Green)

Login to view pricing

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 20" long

Login to view pricing

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 24" long

Login to view pricing

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 20" long

Login to view pricing

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 24" long

Login to view pricing

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 20" long

Login to view pricing

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 20" long

Specification Sheet

Login to view pricing

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
Size: 11" w x 20" h
Styles: Standard - angles on both sides P1 - flat plate on one side and P2 - flat plate on both sides

Login to view pricing

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
Size: 11" w x 20" h
Styles: Standard - angles on both sides P1 - flat plate on one side and P2 - flat plate on both sides

Login to view pricing

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
Size: 11" w x 20" h
Styles: Standard - angles on both sides P1 - flat plate on one side and P2 - flat plate on both sides

Login to view pricing

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

LVB424-11

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 24" long

Login to view pricing

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
Size: 11" w x 24" h

Login to view pricing

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 30" long

Login to view pricing

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 36" long

Login to view pricing

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

LVB436-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
Size: 11" w x 36" h

Login to view pricing

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4â€ rods
Bumper is fastened to dock surface with 3/8â€ steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8â€ diameter.
This model has angles on both sides
Width: 11" bumper 13" incl. angles
Length: 20" long

Login to view pricing

Page 1 of 430 (20 total items)

Jump to page: