Adjustable DC Power Supply 6V/12/24V 3 AMP

• 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
• Full adjustment from 2 to 24VDC if required
• Maximum 3 amp (Output at 70 deg. F and free air)
• Regulation:97.5%
• Maximum input voltage 36 volts
• Fuse protected
• Built-in gel cell battery charger
• Automatic switch over to standby battery in case of AC power failure
• Battery leads (10"254mm) complete with quick connectors
• Ease of installation with supplied adhesive mounting tape

Aluminum Pedestal Post 72"

• Pedestal post with hood
• High quality aluminum
• 72 inches
• Dual face-plate allows for easy wire connections

Roller Carrier Only 2-Hole Sold per Piece

• Sold per piece no box quantity

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX)

• Features Security+2.0â„¢ rolling code technology
• One-button-to-close feature (works with all LiftMaster® garage door openers manufactured since 2006)
• Temporary password option
• Program code directly from keypad
• Backlit keypad with amber LED
• Includes 9V battery
• Compatible with all LiftMaster® garage door openers manufactured since January 1993
• Replaces 877MAX Backwards compatible

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

• Double Angle Rails for doors up to 14'6" high
• Includes #41 chain pack

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 30 Cycles/Hr 1200LB

• Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
• Faster Speed - Average of 12” per second opening on sectional doors.
• Battery Backup Option - (battery backup kit sold separately).
• Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
• Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
• Drive Type 65:1 Gearbox with #50 Chain Output
• Included Accessories: DCWALLCTL - Floor Level Wall Controller with 4-line LCD Display CPS-U - Monitored Through-Beam Photo Eye Kit
• Tracks Sold Separately
• Can program up to 90 remotes/ 30 Keyless Entry

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

• Activates one Delta-3 receiver
• Test/operate LED
• Visor mounting clip supplied
• Power: 9-volt battery
• Codes: 256 (set by 8 dip switches)
• RF frequency: 310 MHz
• Dimensions: 2.16" W x 3.75" H x .95" D
• Same as: DNT00002A or DTD

Small Relay 24VAC 11-Pin 3 PDT

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

• Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
• Thru beam configuration
• UL325 compliant
• Four (4) monitoring interfaces
• 115 ft. operating range
• Easy installation and set-up
• Compatible with many operators
• Weatherproof
• Additonal hoods can be added but only adds 1/3" more coverage.

EMX Radar Presence Sensor

• The MRD-1P radar presence sensor is used to indicate the presence of a vehicle or person in the vicinity of a barrier arm.
• It does not discriminate between people and vehicles.
• It can detect over a range of 1 –30 ft (0.3 – 9.1 m) with the maximum detection distance adjustable via pushbuttons.
• The sensor will ignore any objects beyond the detection distance.
• The sensor is extremely accurate measuring distance to within 0.04” (1 mm).
• The microwave beam is unaffected by rain snow ice fog or sunlight.
• It features Form C relay outputs for presence detection as well as solid-state relay outputs for pulse-on-entry/ pulseon-exit signaling.
• It has a full-featured menu for further customization accessed using the pushbuttons and a 3-digit display