Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

• High speed heavy-duty v-belt drive industrial operator.
• Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
• Two times the speed of the standard jackshaft operator
• Manages soft-starts and soft-stops
• Can be wall or shelf mounted on either side of the door
• Cast iron pillow block bearings
• Chain hoist is not interchangeable on the RSH but can be mounted on either side of the door requires 16" of side room to do so.

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

• High speed heavy-duty v-belt drive industrial operator.
• Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
• Two times the speed of the standard jackshaft operator
• Manages soft-starts and soft-stops
• Can be wall or shelf mounted on either side of the door
• Cast iron pillow block bearings
• Chain hoist is not interchangeable on the RSH but can be mounted on either side of the door requires 16" of side room to do so.

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

• High speed heavy-duty v-belt drive industrial operator.
• Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
• Two times the speed of the standard jackshaft operator
• Manages soft-starts and soft-stops
• Can be wall or shelf mounted on either side of the door
• Cast iron pillow block bearings
• Chain hoist is not interchangeable on the RSH but can be mounted on either side of the door requires 16" of side room to do so.

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

• High speed heavy-duty v-belt drive industrial operator.
• Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
• Two times the speed of the standard jackshaft operator
• Manages soft-starts and soft-stops
• Can be wall or shelf mounted on either side of the door
• Cast iron pillow block bearings
• Chain hoist is not interchangeable on the RSH but can be mounted on either side of the door requires 16" of side room to do so.

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

• High speed heavy-duty v-belt drive industrial operator.
• Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
• Two times the speed of the standard jackshaft operator
• Manages soft-starts and soft-stops
• Can be wall or shelf mounted on either side of the door
• Cast iron pillow block bearings
• Chain hoist is not interchangeable on the RSH but can be mounted on either side of the door requires 16" of side room to do so.

LiftMaster Res. / Light Com. DC Slide Gate Op. MyQ Tech. Heater Sold Separately UL Listed

• RSL12UL features battery backup that provides up to 114 cycles or 63 days of standby power.
• myQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Includes: LMRRUL Monitored Retroreflective Photo Eye and S505AL Monitored Small Profile Resistive Edge
• Gate Travel Speed: 10” per second

Fraba DW-RS-200 Receiver Only 433MHz

• the receiver is built into a Nema 4 case
• Housing: Small (75x40x13 mm / 2.95x1.57x0.51")

LiftMaster Res. / Light Comm. DC Swing Gate Operator 12VDC Heater Not Incl.

• Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
• Features battery backup that provides up to 147 cycles or 63 days of standby power
• Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
• Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
• myQ® Technology enables you to securely control and monitor your gate operator from anywhere
• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• UL® Listed gate operators with monitored safety entrapment protection devices
• Operator Duty Rating: 250 cycles per day
• Optional expansion board: K1D8387-1CC

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

• The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
• Soft-Starts and Soft-Stops
• Electrically activated drum-band type solenoid brake
• Ceiling-mounted with 8.69" headroom clearance required below the tracks
• Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
• Tracks sold separately

1" Vinyl Insert for Brush Retainer per foot

• Color: Black
• Fits in light brush retainers

1-1/2" Vinyl Insert for Brush Retainer per foot

• Color: Black

2" Vinyl Insert for Brush Retainer per foot

• Color: Black

3" Vinyl Insert for Brush Retainer per foot

• Color: Black

Manaras Rapido Jackshaft Op.1 HP 120V 1 Ph ECB No Eyes Right Hand

• The RapidoTM RVH is a high-speed heavy-duty V-belt drive industrial operator designed for use on vinyl rolling doors as well as rolling bug screens.
• RVH offers an opening speed up to 30”/sec while smoothly managing Soft-Starts and Soft-Stops therefore reducing the wear and tear of the complete door system.
• #41 or #50 roller chain with sprockets selected for an optomized door opening time.
• Electrically activated drum-band type solenoid brake.
• All electrical components are in a Nema 1 enclosure. Hinged electrical enclosure cover
• 6-digit electro-mechanical counter mounted inside the control box counts each complete door cycle providing valuable data for maintenance scheduling.
• Working temperature between 0°C to 40°C (32°F to 104°F).
• Clearance: side room required 16" (460 mm)

Fasteners Carriage Bolt 5/16"-18 x 3/4" Zinc Plated 1000/Box

• Full length thread
• Plated
• Gr 2

Richards Wilcox Door Special Order

• Special order as per customer's requirements

Richards Wilcox Replacement Door Panel Special Order

• As per customer's requirements

Richards Wilcox Top Seal & Retainer Option Sold per Foot

• Available option when purchasing doors

Richards Wilcox Thermal Window Special Order

Pulse 2-Channel Receiver

• Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
• Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
• 9-30Vac/dc input.
• FCC approved.