Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 12" x 36"

Laminated Bumper Standard Black 10" x 14" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 10" x 14"

Laminated Bumper Standard Black 10" x 24" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 10" x 24"

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 10" x 36"

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 12" x 12"

Laminated Bumper Standard Black 12" x 14" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 12" x 14"

Laminated Bumper Standard Black 12" x 18" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 12" x 18"

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 12" x 24"

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

• For use in low to medium traffic loading docks in factories and warehouses.
• Can be used as rub rails at the sides of truck wells
• Fabric reinforced rubber pads cut from recycled truck tires.
• Rubber pads laminated between steel angles and secured with 3/4” rods
• Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
• Wall mounting hole size is 7/8” diameter.
• 12" x 36"

LiftMaster Light Curtain **discontinued

• Must be used with a primary entrapment device and be installed along the vertical plane of the door.
• Color-coded transmitter and receiver for easy identification.
• Provides 36 in. of effective height coverage to increase the area of protection.
• Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
• Maximum door width of 33 ft. ensures coverage for most commercial doors.
• Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.
• Solid LED lights indicate correct sensor alignment simplifying installation.
• Green LED on receiver flashes when interrupted providing visible interrupt detection.

LiftMaster Light Curtain Monitored

• The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
• IP67 Water-resistant housing anodized aluminum corrosion resistant
• Operating Temperature: -40° F to +140° F (-40° C to +60° C)
• Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress

Contactor Telemecanique 24V ** Discontinued

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

• For use with D-TEK detectors (most commonly used)
• Hourglass shaped

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

• For use with D-TEK detectors
• Special Order Only
• Narrow profile

Linear 1/2 HP Deluxe Single Lamp Residential Garage Door Opener - Rails extra ***No Longer Available

• Compatible with belt-drive or chain-drive T or I beam rails up to 10'
• Rock solid performance
• Diagnostic system indicates six possible trouble conditions
• 100-watt courtesy light (bulb not included)
• Built-in MegaCode format receiver
• All operator controls and indicators on one side
• Operator includes three-button MTR-3 visor transmitter and deluxe wall station

LiftMaster 10-30VAC/DC Low Power Loop Detector (50-DSP7LP)

• 10-30 VAC/DC low power fail-safe loop detector

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

• The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
• DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
• Optional Battery Backup available for added peace of mind. Sold separately
• Low-power standby mode dramatically reduces energy consumption
• Supplies 800 Newtons of lifting force for heavy doors
• Compatible with belt-drive or chain-drive T or I beam rails up to 10'
• Intelligent self-learning self-adjusting torque settings
• 100-watt courtesy light (bulb not included)
• Built-in MegaCode format receiver
• Operator includes three-button MCT-3 visor transmitter and deluxe illuminated wall station

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

• The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
• DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
• Optional Battery Backup available for added peace of mind. Sold separately
• Low-power standby mode dramatically reduces energy consumption
• Supplies 800 Newtons of lifting force for heavy doors
• Compatible with belt-drive or chain-drive T or I beam rails up to 10'
• Intelligent self-learning self-adjusting torque settings
• 100-watt courtesy light (bulb not included)
• Built-in MegaCode format receiver
• Operator includes three-button MCT-3 visor transmitter and deluxe illuminated wall station

Linear 800 Newton Smart DC Powered Garage Door Opener spott Wi-Fi Accept Both Belt or Chain Rail

• The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
• DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
• Optional Battery Backup available for added peace of mind. Sold separately
• Low-power standby mode dramatically reduces energy consumption
• Supplies 800 Newtons of lifting force for heavy doors
• Compatible with belt-drive or chain-drive T or I beam rails up to 10'
• Intelligent self-learning self-adjusting torque settings
• 100-watt courtesy light (bulb not included)
• Built-in MegaCode format receiver Wi-Fi Connectivity with spott and Linear PRO Access mobile app
• Operator includes three-button MTR3 visor transmitter and WWS850 multi-function Wi-Fi wall station

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

• Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
• Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
• Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
• Release the operator’s quick-disconnect trolley to open or close the garage door manually
• Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
• Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required
• Comes with: (1) MTS3 3-B remote Wi-Fi Multi-Function Wall Control Station Safety Eyes