Linear Heater Kit Assembly 115V Cage Style

• Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

Linear Heater Kit Assembly 230V Cage Style

• Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

Linear Apex II Module

• Newer model from Jan 2016
• The APEX II is backwards compatible but you will need to add monitored external entrapment devices.

Linear GTO Alarm 24VDC Non-Pulsed Apex

Roller 6200 Sealed Bearing 2" White Nylon 3.48" Short Stem

• 2" diameter white nylon tire
• 6200 sealed precision bearing
• Zinc plated 4.56" Overall length 3.48" stem
• Rating: 100lb; 100000 cycles of a 12′ door

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

• 2" diameter white nylon tire
• 6200 sealed precision bearing
• Zinc plated 7.04" Overall Length 5.96" stem
• Rating: 100lb; 100000 cycles of a 12′ door

FAAC P Limit Switch Magnetic 746/844 (Rack)

• Compatible with the 746 and 844 motors
• Replaces discontinued FAAC Part; 7580375

FAAC Limit Switch Assembly P740-741

• For models 740-741

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

• Compatible with any garage door opener with a simple 2-wire dry contact
• Includes 2-conductor bell wire
• Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

• Open/Close/Stop remote for 9 doors
• Compatible with 3-channel Allstar and MVP receivers
• Stationary mounting
• Easy access to battery and coding switch
• Power: 9-volt battery
• Codes: 6561 (set by eight trinary dip switches)
• RF frequency: 318 MHz
• Dimensions: 3.625" W x 6.625" H x 2.375" D
• Order number: 190-107476

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

• Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
• Uses a high surface area aluminum heat emitter to eliminate the need for a fan
• Provides low-radiation and high-convection heating in the enclosure
• Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
• Compatible with operators SL575 SL585 and SL595

LiftMaster Dual Trolley Mod. #41 Chain for 16ft High Door Includes (2) 16' (Actual length 227") tracks and (1) Round Bar 240"

• Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
• Includes 16ft tracks Round Bar 1" x 20'
• For H/J/GH

LiftMaster Manual Hoist Mod. Kit #48 Chain Drive

• This is an available factory installed modification only

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

• For 3/4 Hp & 1 Hp Trolley operators
• Includes floor level brake release cable 1" x 12' round bar.

LiftMaster Bi-Parting Mod Kit 12ft (Includes 19-5118 Chain #41 for 18ft Door and 10-5816-P Track for 16ft Door

• Includes: 65-5501 Bi-Parting 19-5118 Chain #41 for 18ft Door 10-5816-P Track for 16ft Door

LiftMaster Bi-Parting Mod Kit 16ft (Includes 19-5124 Chain #41 for 24ft Door and 10-5820-P Track for 20ft Door ***Actual length 275"***

• Includes: 65-5501 Bi-Parting 19-5124 Chain #41 for 24ft Door 10-5820-P Track for 20ft Door

LiftMaster 7 Conductor Control Wire 500ft

• 20 AWG
• Ideal for wiring CPS-RPEN4 photocells

LiftMaster Dual Aux Trolley Mod. M15 #41 Chain for 12ft High Door

• Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
• Includes up to 12ft of tracks
• For H/J/GH

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel