Doorlec Transformer 460V pr 120V sec 35VA

• 460V prImary 120V secondary 35VA

Doorlec Transformer 550Vpr 120V sec. 35VA

Doorlec Transformer 230V pr 120V sec 35VA

• 230V prImary 120V secondary 35VA

3/64" Sleeve ONLY 100/pkg

• Aluminum sleeves only 100 per pack
• Stops are not available in this size

Linear Wireless Multi-Code Keypad 310 MHz

• Compatible with 310 MHz Stanley and Multi-Code receivers
• 4-digit access code
• Backlit keys
• Easy access to battery
• Power: 9-volt battery
• Codes: 1024 (set by dip switches)
• RF frequency: 310 MHz
• Dimensions: 2.75" W x 6.25" H x 1" D
• Same as: 49442 and MCS298601
• Will not works with a Stanley operator with a yellow learn button

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

• A Whiting original

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

• A Whiting original

LiftMaster Speaker for EL25 (41B0639)

• 1B0639

LiftMaster Main Board EL25 (041B0735)

• Same as 041B0735

LiftMaster Output Board EL25

• Output board for models EL25 and EL2000 (041B0737)

LiftMaster Direct Connect Cable (41B0747)

• EL25 conecting cable

Control Station Exterior Surface Mount O/C N4 with Key Lockout

• OPEN-CLOSE Push Button with Lockout
• Metal Enclosure
• Buttons aligned vertically H=4-3/8"" W=4-1/8"" D=2-5/8""

Exterior 2-btn O/C Nema-4 Pushbutton Control Station Non-Metallic

• Surface mount
• Non-Metallic
• Open / Close

Rolling Steel 2" Curved Stamped Endlock Left Hand

• Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
• Continuous endlocks are at both ends of every slat.
• Rivets included with endlock

Rolling Steel 2" Curved Stamped Endlock Right Hand

• Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
• Continuous endlocks are at both ends of every slat.
• Rivets included with endlocks

Rolling Steel 2" Curved Cast Windlock

• Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
• A wind lock is a small metal device that is attached to each slat.
• Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
• When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
• With a windlock your door can operate efficiently despite wind load or pressure.
• Windlocks are easy to add on to any existing rolling steel or shutter door
• Rivets included

Rolling Steel 2" Curved Continuous Windlock

• Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
• A wind lock is a small metal device that is attached to each slat.
• Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
• When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
• With a windlock your door can operate efficiently despite wind load or pressure.
• Windlocks are easy to add on to any existing rolling steel or shutter door
• Rivets included

Devanco Loop 2' x 4' pave-over 50' lead-in

• Ideal for use on with gravel driveways or surfaces that are to be asphalted
• Features a twisted lead-in to reduce the chances of interference and false detections.
• Direct burial loops should be buried approximately 6" deep

Devanco Loop 2 x 6' pave-over 50' lead-in

• Ideal for use on with gravel driveways or sufaces that are to be asphalted
• Features a twisted lead-in to reduce the chances of interference and false detections.
• Direct burial loops should be buried approximately 6" deep

Devanco Loop 2' x 6' saw-cut 50' lead-in

• Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
• Ideal for use on existing asphalt or concrete surfaces
• Features a non spliced continuous wire throughout loop turns and lead-in.
• requires the use of loop sealer when being installed to ensure long lasting trouble-free detection