Miller Edge Air Wave Switch Only No Enclosure

• Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
• Applications: commercial sectional doors rolling doors and mass transit
• Works on doors up to 60ft
• Can be used with standard pneumatic hose and Miller Edge extrusion
• Sensitivity: 2mm to 500mm
• Ambient temperature range: -49F to 180F
• Electrical configuration: 2 wire NO
• Adjustable sensitivity
• Mechanical life: minimum 2 million operations
• Electrical life: 1 million operations depending on contact load

Miller Edge Air Wave Switch in NEMA 4 Enclosure

• Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
• Applications: commercial sectional doors rolling doors and mass transit
• Works on doors up to 60ft
• Can be used with standard pneumatic hose and Miller Edge extrusion
• Sensitivity: 2mm to 500mm
• Ambient temperature range: -49F to 180F
• Electrical configuration: 2 wire NO
• Adjustable sensitivity
• Mechanical life: minimum 2 million operations
• Electrical life: 1 million operations depending on contact load
• Durable and water tight

Miller Edge Air Wave Switch in ABS Box

• Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
• Molded enclosure
• Applications: commercial sectional doors rolling doors and mass transit
• Works on doors up to 60ft
• Can be used with standard pneumatic hose and Miller Edge extrusion
• Sensitivity: 2mm to 500mm
• Ambient temperature range: -49F to 180F
• Electrical configuration: 2 wire NO
• Adjustable sensitivity
• Mechanical life: minimum 2 million operations
• Electrical life: 1 million operations depending on contact load

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

• Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Miller Edge Air Wave Kit 18ft No Coil Cord

• Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

• AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
• There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
• The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
• Battery is included # CR2032

Miller Edge Air Wave Kit 12ft No Coil Cord

• AW14 12ft. of RAH-500 P-50H 218-27-18 P50
• Kit Includes: AW14 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Miller Edge Air Wave Kit 18ft No Coil Cord

• AW14 18ft. of RAH-500 P-50H 218-27-18 P50
• Kit Includes: AW14 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

• AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
• AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose

Miller Edge Clima-Guard 4-Wire Monitored Black Right Hand Outlet Sold by the Foot

• Clima-Guard functions exactly like a pressure sensitive electric edge but with an added layer of protection.
• The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier.
• ClimaGuard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.
• Electrical Configuration: Normally open
• this edge comes with the channel

Miller Edge Protective Boot Covering for IG2 Eyes Sold as a Pair

Miller Edge Wall Mount Extension Bracket

• 1 ft L x 2" H x 3" W

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

• The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
• The light beam is intended to function as a protective line guarding a potentially hazardous zone.
• When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
• Universal Design Works with Pre and Post 2010 Operators
• Spans Distances up to 30 feet (model dependent)
• Time Saving Installation
• Vertical or Horizontal Mounting
• Easy Alignment with Positioning Indicators
• UL325 Compliant for Doors and Gates
• NEMA 4 enclosure
• Impact Resistant for rugged environments
• Easily Replaceable Batteries (no special order)
• Enhanced Sun Guard Protection
• Built in Strain Relie

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

• The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
• The light beam is intended to function as a protective line guarding a potentially hazardous zone.
• When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
• Universal Design Works with Pre and Post 2010 Operators
• Spans Distances up to 50 feet (model dependent)
• Time Saving Installation
• Vertical or Horizontal Mounting
• Easy Alignment with Positioning Indicators
• UL325 Compliant for Doors and Gates
• NEMA 4 enclosure
• Impact Resistant for rugged environments
• Easily Replaceable Batteries (no special order)
• Enhanced Sun Guard Protection
• Built in Strain Relief

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

• Flexible spring loaded pedestal stand
• 30 degree of flex
• 27" high from bottom base to photoeye

Miller Edge Air-Wave Edge Black Sold per Foot

• This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
• When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
• It has been designed to fit most doors with double track bottom retainers.
• With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
• The MAW123 is resistant to flame water and most common greases and oils.

Miller Edge Air-Wave Edge Black Sold per Foot

• This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
• When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
• It has been designed to fit most doors with double track bottom retainers.
• With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
• The MAW123 is resistant to flame water and most common greases and oils.

Miller Edge Air-Wave Edge Black Sold per Foot

• This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
• When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
• It has been designed to fit most doors with double track bottom retainers.
• With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
• The MAW123 is resistant to flame water and most common greases and oils.

Miller Edge Air-Wave Edge Yellow Sold per Foot

• This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
• When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
• It has been designed to fit most doors with double track bottom retainers.
• With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
• The MAW123 is resistant to flame water and most common greases and oils.

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

• €¢Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty