Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

• A heavy-duty industrial jackshaft operator.
• For use on Standard High and Vertical Lift sectional doors.
• Can also be used on Rolling doors or Grilles.
• Comes with a self-engaging chain hoist for manual operation.
• Clearence: side room required 15"
• 25 cycles per hour 100 cycles per day

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

• Same as MD-00322

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

• High speed heavy-duty v-belt drive industrial operator.
• Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
• Two times the speed of the standard jackshaft operator
• Manages soft-starts and soft-stops
• Can be wall or shelf mounted on either side of the door
• Cast iron pillow block bearings
• Chain hoist is not interchangeable on the RSH but can be mounted on either side of the door requires 16" of side room to do so.

Manaras Input Shaft for OSHW

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

• Nema 7/9 control box
• Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

Manaras Transformer 575V-24V-50VA

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

• A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
• It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
• Electrically activated drum-band type solenoid brake
• Full overload protection

Manaras 144-Door Transmitter O/C/S 390 MHz

• 3-button O/C/S transmitter for144 Doors
• LED Indicator Nema 1 Enclosure
• Soft touch push buttons including a bright red stop button for easy identification
• Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
• Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
• Wall or Post mount
• 390 MHz

Manaras Univ. Aux Output Module BOARD070

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

• For Commercial/Industrial Garage Door Applications
• Wall Mount
• DIP Switch and Rolling Code Technology
• Sixteen (16) Fixed Codes / Receiver
• 313 MHz & 390MHz Radio Frequency
• Controls One (1) Door
• Open/Close/Stop or Open/Close Functionality
• LED Indicator
• Learn Button on Front Surface
• 24 VAC/VDC Power Supply
• Up to 100-ft. Range
• Dimensions: 5" x 4.5" x 1.25"
• Use with Old and New Generation Radio Controls
• Compatible with Most Commercial Operator Brands
• Pairs with an Infinite Number of Radio Control Transmitters
• Replaces RADIO-RE900 RADIOKIT005 RADIO-15 37