Page 1 of 860 (10 total items)
Replacement Cylinder Zinc Includes 2 Keys
7-22-1
Replacement Cylinder Zinc Includes 2 Keys
  • Includes 2 keys Screws Backer Plate and Outer ring

Login to view pricing

Login
Uni-Size Bottom Weather Seal 8'2" Long *To extent of inventory*
UNI-100-82
Uni-Size Bottom Weather Seal 8'2" Long *To extent of inventory*
  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box

Login to view pricing

Login
Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually
LVB436-11
Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually
  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • This model has angles on both sides
  • Width: 11" bumper 13" incl. angles
  • Length: 36" long

Login to view pricing

Login
Laminated Bumper Standard Black 12" x 36" 4" Projection Horizontal Installation
LB412-36
Laminated Bumper Standard Black 12" x 36" 4" Projection Horizontal Installation
  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • 12" x 36"

Login to view pricing

Login
Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery
750
Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery
  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)

Login to view pricing

Login
Skylink 2-Button Keychain Remote Rolling Code
18T
Skylink 2-Button Keychain Remote Rolling Code
  • Compact-size dual button transmitter can operate two garage doors with 18R Garage Door Receiver
  • Alkaline battery included. FCC/IC approved.

Login to view pricing

Login
Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation
TB406-36SF
Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 6" x 36"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation
TB406-24SF
Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 6" x 24"

Login to view pricing

Login
Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually
TVB636-11SF
Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
  • Size: 11" w x 36" h

Login to view pricing

Login
Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually
TVB624-11SF
Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
  • Size: 11" w x 24" h

Login to view pricing

Login
Page 1 of 860 (10 total items)