Page 1 of 860 (10 total items)
Pulsar 3-btn 3-Door Transmitter 108817 318 MHz
P-8833T
Pulsar 3-btn 3-Door Transmitter 108817 318 MHz
  • Allstar compatible
  • Three channel transmitter
  • 8 dipswitches 318 MHz
Programming Instructions

Login to view pricing

Login
Vinyl Seal 4" Bottom Bead End Grey 200' Spool
V3564-00-W-200
Vinyl Seal 4" Bottom Bead End Grey 200' Spool
  • Bead diameter 3/16" - 7/32" +/- tolerance

Login to view pricing

Login
Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs
XRS-02
Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs
  • Prevents damage to garage door side seals due to gnawing rodents
  • Made of high quality stainless steel so it will not rust
  • Invisible from the exterior. Installs on the inside of weather strip - no painting or covering is required.
  • Easy installation. No tools required just peel and stick
  • An inexpensive solution to a common rodent problem around households
  • One size fits all. No need to measure or trim

Login to view pricing

Login
Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually
LVB420-11SF
Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
  • Size: 11" w x 20" h
  • Styles: Standard - angles on both sides P1 - flat plate on one side and P2 - flat plate on both sides

Login to view pricing

Login
Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2
LVB420-11SF/P2
Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
  • Size: 11" w x 20" h
  • Styles: Standard - angles on both sides P1 - flat plate on one side and P2 - flat plate on both sides

Login to view pricing

Login
Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only
DC1000-125
Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only
  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
  • Maximum Recommended Counter balance Sectional Door size: 500 square feet w/1.25" shaft
Pulse Series Installation ManualsDC Series Brochure

Login to view pricing

Login
Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz
0220-1K-390
Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz
  • Overhead compatible full-size transmitter

Login to view pricing

Login
FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued
T-832-H
FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued
  • Open/Close remote for 2 doors
  • Battery 12V included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P220-2K
Programming instructions

Login to view pricing

Login
Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz
P220-1K
Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz
  • 318MHz single button 9 trinary dipswitch remote control transmitter
  • Compatible with Allstar and Pulsar
  • Compatible with P294-K receiver

Login to view pricing

Login
Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz
P220-2K
Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz
  • Allstar compatible remote

Login to view pricing

Login
Page 1 of 860 (10 total items)