Page 1 of 860 (10 total items)
Linear Single Channel Mid-Range Receiver ** Discontinued
XR-1
Linear Single Channel Mid-Range Receiver ** Discontinued
  • 1-channel mid-range receiver
  • Up to 10 miles line-of-sight range (with XT-1 & XT-4)
  • Up to 2 miles of line-of-sight with handheld devices
  • Over 64 000 codes
  • Weather-resistant case
  • RF frequency; 27.255 MHz
  • Dimensions: 4.25"W x 6.25"H x 2.5"D
  • Power: 12 VDC
  • Antenna (ANT-1A or ANT-2) not included
  • Same as SSR00068

Login to view pricing

Login
Linear Wiegand Output Receiver 318 MHz
WOR
Linear Wiegand Output Receiver 318 MHz
  • Designed for use as an access control interface for Linear’s block coded digital transmitters.
  • The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
  • Ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding
  • Field adjustable read range - from 5 to 500 feet
  • Connects as easily as a card reader; transmitters are added like cards with no software changes required
  • Facility and ID codes tailored to system requirements
  • Weather-resistant case for mounting outdoors
  • RF frequency: 318 MHz
  • Dimensions: 4.25" W x 6.25" H x 2.5" D
  • Same as: ACP00727

Login to view pricing

Login
Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH
VS-GSLG-723
Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH
  • Up to 24" per second gate speed
  • Max gate length: 100 ft
  • Max gate weight: 4000 lbs
  • Integral APeX Controller
  • Soft start/soft stop
  • Programmable speed control
  • Direct C-face drive with brake
  • #50 roller drive chain
  • All accessory connections 24 VDC
  • Heater NOT included heater option #620-100990-230
Installation manualSpec sheet

Login to view pricing

Login
FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483
T-831
FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483
  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
  • RF frequency: 311 MHz
  • Dimensions: 3.625" W x 6.625" H x 2.375" D
  • Linear part number: 107483

Login to view pricing

Login
Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included
SLR-221
Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included
  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
  • Built-in networked dual gate capability using 3-wire shielded cable
  • Maximum duty cycle: Continuous
  • Gate speed: 11 inches per second
  • Max. gate weight: 500 lbs
  • Max gate length: 25 ft
  • Cold weather package NOT included sold separately

Login to view pricing

Login
Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included
SLC-221
Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included
  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
  • Built-in networked dual gate capability using 3-wire shielded cable
  • Maximum duty cycle: Continuous
  • Gate speed: 11 inches per second
  • Max. gate weight: 1000 lbs
  • Max. gate length: 37 ft
  • Cold weather package NOT included sold separately

Login to view pricing

Login
Linear / GTO 1-Button Transmitter 318 Mhz
RB741
Linear / GTO 1-Button Transmitter 318 Mhz
  • Standard transmitter included with all GTO gate operators
  • Much smaller in size than previous model and improved signal range
  • The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
  • It is compatible with GTO and Mighty Mule gate operators
  • The code settings are the 9 dipswitches located inside the cover.
  • Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

Login to view pricing

Login
Linear GTO Garage Door Receiver Adapter Mighty Mule
RB709U-NB
Linear GTO Garage Door Receiver Adapter Mighty Mule
  • The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
  • Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
  • Easy to install with almost any garage door opener
  • One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters

Login to view pricing

Login
Linear Power Supply
R4257
Linear Power Supply
  • For SW100 and SL100 gate operators

Login to view pricing

Login
Linear GTO Battery and Transformer
R4022
Linear GTO Battery and Transformer
  • Base station not included

Login to view pricing

Login
Page 1 of 860 (10 total items)