LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Torsion Spring .363 x 6" x 12ft LH Green/White

• Wire size: .363
• Inside diameter: 6"
• Length: 12 ft

LiftMaster Trolley Nut Kit LA500

• The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
• The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
• The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
• LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

NICE 1-btn Keychain Remote 433.92 MHz

• Rolling code No internal dip switches programming with the reciever
• Battery included: 12V (GP23A)
• Dimensions: 72 x 15 x 40 mm

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

• On board receiver with antenna
• Continuous duty industrial motor with overload protection
• Heavy duty 5L V-belt
• Adjustable friction clutch
• Solenoid brake (optional PRO-JB) recommended for large doors
• 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
• Emergency disconnect with electrical cut-out switch for manual operation
• Three button open-close-stop control station Nema-1
• #41 roller chain & sprockets on all internal drives
• #50 roller chain and sprockets on final drive
• 1" permanently lubricated & sealed ball bearings on final drive shaft
• External radio control terminal strip

LiftMaster 10' Arm only for Techna Barrier Gate

• For use on Techna gate operator

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

LiftMaster 8ft Belt Assembly for Models '93-2000

• For use with LiftMaster belt drive models 1270 1280 1280R.
• Full belt assembly
• For use with Chamberlain belt drive models 8100 8200 and 9200.
• For standard 8 foot high garage doors
• T rail assemblies ONLY.

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

• Shaft Mounted Junior Hoist
• 4:1 Reduced Drive
• Sprocket: 41B36. Bore size: 1-1/4" diameter
• Cross Reference: OMI 4020
• Requires minimum 3/8" center line offset.
• Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 9' Long - Black

• Black rigid vinyl retainer with black flexible vinyl insert.
• Reverse angle bolt-on vinyl retainer.
• Bolts onto reverse angle steel jamb.