Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells (MUST incl. resistor)

• Works in all Doorlec model openers except R-99
• Input power to board is 120V
• 24V DC available on terminals 9 & 11
• Accessory power on terminals 1 & 11
• 1 = Stop. 2 = Com. 3 = Open 4 = Close
• Can be adjusted for constant pressure

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

• 3 Button station (NEMA 1)
• 1650 RPM high starting torque motor with overload protection
• Inherent Mechanical Brake (I.M.B)
• B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
• On board Open Close & Stop for ease of setting limits
• Pre-wired to accept sensing devices
• 24 Volt accessory power
• On board (372 MHz) receiver capable of programming up to 20 transmitters
• External receiver connection
• NEMA 1 Electrical enclosure
• Adjustable friction clutch
• Maximum Output Revolutions - 45
• Primary Drive: Heavy Duty 4L V-Belt
• Secondary: #41 CHAIN / SPROCKETS
• Output: #50 CHAIN / SPROCKETS
• 32 RPM output shaft speed
• Door speed determined by the door system installed
• Standard sprockets: Sectional: 50B12 x 1” bore to 50B18 x 1” bore OR 50B18 x 1 1/4” bore Steel Rolling: 50B12 x 1” bore to 50B24 x 1 1/4” bore

Devanco Bottom Vinyl U-Rubber 4" Black 250' spool

• 250ft spool of vinyl insert for sectional doors
• low temp vinyl
• perforations in the bottom to ensure that condensation escapes
• Fits most standard bottom retainers

Wayne Dalton Mini Storage Door ** Price by Quote Only

• Mini Storage Door Made to Order

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

• Designed for use on commercial sectional doors with high or vertical lift
• May also be used on small rolling grilles with max. 15 cycles per hour
• Includes chain hoist
• Includes solenoid brake
• On board receiver with antenna
• On-Board receiver holds up to 20 transmitters

Micanan 3-btn O/C/S Transmitter 372 MHz

• Hand held transmitter for on-board receiver with smart 10.0 board only

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

• Priced per inch - cones sold seperately
• For factory installed cones use part no. C-258-INSTALLED

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

• Priced per inch - cones sold seperately
• For factory installed cones use part no. C-258-INSTALLED

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

• A Whiting original