Miller Edge RBand Monitored Wireless Door Edge System

• RBand is a monitored sensing edge transmitter/receiver system.
• The receiver can be paired with up to three transmitters.
• On board diagnosticsallows for easy set up and troubleshooting.
• Offers pulsed and normally open outputs.
• Ideal for commercial door operators manufactured after 2010.
• Bi-directional link improves immunity to RF interference.
• UL325
• 2 year warranty
• Operating temperature: -40C to 60C
• 916Mhz

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

• Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
• Touch sensitive signaling
• Temperature range: -30F to 155F
• Lead wire: 18 gauge 2ft length
• Sensitivity: nominal 4 PSI
• 2 wire NO configuration
• Vertical or horizontal mount
• ANSI/UL325 recognized component
• Mounting channel sold separately
• One year warranty

Miller Edge Transmitter Binary Nema 4 Enclosure

• The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
• It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
• The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
• The gate or door stops movement and will then reverse the direction of travel.
• Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
• Response time: 70 milliseconds
• Opertating temperature: 0°F to 130°F (-18°C to 55°C)
• Operating frequency: 318Mhz
• Maximum operating distance: 100ft
• Coding: Selectable 9 pole 2 position DIP switch
• Power Source: (2) 1.5 volts AA alkaline batteries
• Input/Output: Input: 2-wire N.O. sensing edge
• Repl.: MWT12

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

• Electromechanical slide-in edge for sectional doors.
• With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
• ME116 is resistant to flame water and most common greases and oils
• Soft ends
• Temperature range -30F to 155F
• Lead wire: 22 gauge universal
• Sensitivity: nominal 6-8 PSI
• 2 wire NO configuration
• Vertical or horizontal mount
• ANSI/UL325 recognized component
• Mounting channel sold separately
• One year warranty

Lynx Chain Hoist 1:1 Ratio DNS 9" Pocket Wheel 1" Shaft CH-11-DNS

Thimble 1/4" - 100 per pkg

1/4" Sleeve ONLY 100/pkg

• Sleeves only 100 per pack

1/4" Stops ONLY 100/pkg

• Stops only - 100 per pack

Micanan Swivel Pulley

• For models PRO-H / HB

Cable 1/8" 7x7 500' Galvanized Supreme

• Galvanized cable 1/8" 7x7 500ft spool.
• A higher quality cable than the Chinese cable.
• Meets endurance test requirements of over 35000 work cycles
• Lubricated for flexability and longer service life