Page 1 of 860 (10 total items)
Erone 2-Channel Mini Transmitter Black 433MHz
SETR2641AM2K
Erone 2-Channel Mini Transmitter Black 433MHz
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
Wireless System Chart

Login to view pricing

Login
Exhaust Port 4" with latch short barrel ** To Extent of Inventory
EP2982
Exhaust Port 4" with latch short barrel ** To Extent of Inventory
  • 4" inside diameter 1/4" sleeve with latch.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.

Login to view pricing

Login
Whiting Intermediate Panel Tongue & Groove 15-1/2" h Cut to Exact Length *** Price on Request
342.155-CUT
Whiting Intermediate Panel Tongue & Groove 15-1/2" h Cut to Exact Length *** Price on Request
  • Primer only
  • Customer must specify exact length required

Login to view pricing

Login
Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation
LB610-36SF
Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 36"

Login to view pricing

Login
Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation
LB610-36
Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation
  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 36"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation
LB610-24SF
Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 24"

Login to view pricing

Login
Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation
LB610-24
Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation
  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 24"

Login to view pricing

Login
Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation
LB610-12
Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation
  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 12"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation
LB610-18SF
Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 18"

Login to view pricing

Login
Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation
LB610-18
Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation
  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 18"

Login to view pricing

Login
Page 1 of 860 (10 total items)