LiftMaster Antenna

• For various gate operators

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors (2 Stud)

• Steel construction Black E-coat finish
• Stud plate for 2 stud
• Cross Reference: W #2032

Automatic Systems Feig Double Channel Loop Detector BL229

• For AS1620 BL229

EMX Test Loop

• Electrical diagnostic tool for loop and vehicle detectors
• Two-wire: red and black
• Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
• Compatible with most brands of loop detectors

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

• The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
• For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
• Controls and indicators are mounted on front panel
• Available in 9 - 41 VDC 6 - 29 VAC.
• Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
• Housed in a small relay-type housing
• Surge protection
• Use with either Probe-50 Probe-100 or Probe-150

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

• The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
• The probe and its electronics are housed in a slim design that is buried next to a driveway.
• The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
• Probe assembly and wire are water tight and direct burial compatible
• Harness is pre-wired onto lead wire for easy installation
• Settings are placed in a non-volatile memory in case of power failure
• Accepts wide range of power inputs from 9 – 41 VDC or 6 – 29 VAC
• Low current consumption of 250uA standby and 12mA activated

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

• Wand only
• Requires CS101 (Carsense-101)

EMX Remote Tuning and Adjustment Control Device

• If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
• The VMD202-R may then be removed or left in place as desired.

Whiting .200 x 2-3/16 x 28" Roadside with Cones

Whiting .200 x 2-3/16 x 28" Curbside with Cones