Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

LiftMaster Electronic Circuit Board Assembly 315MHz

• Fits 3265 PD612C
• Replaces 41AC150-2 (board only - need to install on exisiting panel)
• Also known as 41AC050 41AC050-2M

Roller 2" Steel 4" stem 10 ball

• Steel Roller Wheel Diameter: 2"
• Working Length: 3.5" Overall Length: 4.5"
• Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

• Priced per inch - cones sold seperately
• For factory installed cones use part no. C-375-INSTALLED

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

• Priced per inch - cones sold seperately
• For factory installed cones use part no. C-375-INSTALLED

Micanan Brake Shoe and Drum Assembly

• Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
• Assembly includes: Both right & left brake shoe and the drum

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

• Priced per inch - cones sold seperately
• For factory installed cones use part no. C-200-INSTALLED

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Orange/Green

• Priced per inch - cones sold seperately
• For factory installed cones use part no. C-200-INSTALLED

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

• Open/Close remote for 2 doors
• Compatible with 310 MHz Stanley and Multi-Code receivers
• Supplied with visor clip
• Easy access to battery and coding switches - 10 dip switches
• Power: 9-volt battery
• Codes: 1024 per channel (set by dip switches)
• RF frequency: 310 MHz
• Dimensions: 2.5" W x 3.75" H x 0.875" D
• Same as: MCS109410

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

• W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
• Weight: 8.6 kg / 18.9 lbs
• Length: 77.2 cm / 30.39 inches
• Max. Torque: 369lb/ft
• RPM: 500-2000
• Material: Aluminium steel plastic
• Operating temperature: +30 – 20 C / +86° F to -4° F