Page 1 of 430 (20 total items)
Lynx 1-btn Transmitter Dip Switch 303 MHz
T1B-DS
Lynx 1-btn Transmitter Dip Switch 303 MHz
  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
  • Same as model 2211-L (TX)
Compatibility chart

Login to view pricing

Login
Manaras Trolley Hardware Bag
T2-HBAG
Manaras Trolley Hardware Bag
  • Various fasteners

Login to view pricing

Login
Lynx 2-btn Transmitter Dip Switch 303 MHz
T2B-DS
Lynx 2-btn Transmitter Dip Switch 303 MHz
  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
Compatibility chart

Login to view pricing

Login
Lynx 3-btn Transmitter Dip Switch 303 MHz
T3B-DS
Lynx 3-btn Transmitter Dip Switch 303 MHz
  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
Compatibility chart

Login to view pricing

Login
Lynx 3-btn O/C/S Transmitter 303 MHz
T3B-OCS
Lynx 3-btn O/C/S Transmitter 303 MHz
  • Ultra secure mid-size transmitter does not have dip switches.
  • 3 button (Open/Close/Stop)
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Must be used with Lynx OCS receiver for o/c/s functions
  • Visor clip and 12V battery included
Compatibility chart

Login to view pricing

Login
LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator ***NLA
T501L5
LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator ***NLA
  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure

Login to view pricing

Login
LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available
T751L5
LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available
  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure

Login to view pricing

Login
LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available
T753L5
LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available
  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure

Login to view pricing

Login
LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available
T755L5
LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available
  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure

Login to view pricing

Login
Assembled Track Set 2" Comm 14g Bracket Mount for 1-3/4" Door Std Lift 12" Radius
TA-2-S/L-1200
Assembled Track Set 2" Comm 14g Bracket Mount for 1-3/4" Door Std Lift 12" Radius
  • Includes horizontal and vertical tracks

Login to view pricing

Login
Assembled Track Set 2" Std Lift 8' H 32" Radius
TA-2-SL-0800-32R
Assembled Track Set 2" Std Lift 8' H 32" Radius
  • Includes horizontal and vertical tracks

Login to view pricing

Login
LiftMaster Single Line Telephone Access Control with Radio
TAC1
LiftMaster Single Line Telephone Access Control with Radio
  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
Installation ManualProgramming Instructions

Login to view pricing

Login
Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer
TAOS141W
Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer
  • Priced per each

Login to view pricing

Login
Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer
TAPS1458W
Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer
  • Priced per each

Login to view pricing

Login
Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually
TB-20
Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually
  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 3 1/2" L x 6" W 3 1/2" Projection

Login to view pricing

Login
Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation
TB406-24SF
Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 6" x 24"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation
TB406-36SF
Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 6" x 36"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation
TB410-14SF
Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 14"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation
TB410-18SF
Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 18"

Login to view pricing

Login
Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation
TB410-24SF
Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation
  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 24"

Login to view pricing

Login
Page 1 of 430 (20 total items)