EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

• Outdoor and carwash through beam Commercial Photocells.
• Up to 115' sensing distance
• Electronic sunlight filter
• Automatic compensation for temperature changes
• 12 to 24VAC/DC input voltage
• one form C relay (NO and NC output)
• Capable of penetrating 70% obstruction due to fog steam and even spray
• Immune to vibration
• Infrared sender and receiver in a water-proof NEMA 4X enclosure including 5A120V AC relay output
• Made in the USA

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

• The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
• The IRB-4X2 will work with any control board that accepts dry contact on the input.
• The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
• *Not for use in applications requiring UL325 compliance
• Thru beam design is not affected by shiny surfaces
• Wide 24Ëš transmission angle allows easier alignment and increases reliability
• The IRB-4X2 has an IP65 rated housing with integrated hood making confident installation a breeze
• Operating Range: 5 to 115 ft (35 m)
• Power: 12-24 VDC 24 VAC
• Operating Temp: -40F to +170F
• Dimensions (L x W x H): 3.6” (91 mm) x 2.9” (74 mm) x 2.9” (74 mm)
• Conduit Hole Size (bottom of the housing): 0.83" (21.3 mm) – large enough for 1⁄2 in. NPT

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

• Brackets are predrilled
• Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
• Made of metal
• Sold as a pair
• 9" x 3" L-Shaped

EMX Industries Plastic Enclosure Only for IRB-4X Nema 4 Sold Individually

• Includes housing and clear plastic front

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

• Designed to operate in areas with explosive environments.
• NEMA 4 and 7 housing
• NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
• Copper free Aluminum with Epoxy finish.
• Potentiometer range adjustment to allow more precise tuning to site.
• Through beam design is not affected by shiny surfaces.
• Modulated infrared to reduce the effect of sunlight fog rain dust and dirt.
• No focusing lens.

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

• Type B1 non-contact sensor
• UL325-2018 compliant
• Lens-less design
• Simple 2-wire connection
• Relay contacts available
• NEMA 4X enclosure
• Selectable frequency modes
• Operating Range: up to 115 ft. (35m)
• Detection Angle: 24°
• Sensitivity adjustment: potentiometer

EMX Monitored Receiver Board Only

• Receiver board only for IRB-MON

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

• Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
• Thru beam configuration
• UL325 compliant
• Four (4) monitoring interfaces
• 115 ft. operating range
• Easy installation and set-up
• Compatible with many operators
• Weatherproof
• Additonal hoods can be added but only adds 1/3" more coverage.

EMX Industries Universal Retroreflective Photoeye Nema 4X New UL325-2016 *** To extent of Inventory

• Type B1 non-contact sensor
• UL 325-2016 compliant
• Operating range up to 60 ft. (18.3 m)
• NEMA 4X enclosure
• Sensitivity adjustment: potentiomete
• Mounting bracket and reflector provided
• The IRB-RET has 5 monitoring interfaces:
• Normally closed
• Two-wire pulsed (2 freq)
• Two-wire pulsed (3 freq)
• Four-wire pulsed
• 10k resistive termination

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only

• Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
• Easily installed using the existing mounting holes of the Photo Eye
• Constructed of zinc plated steel
• Black powder-coated finish
• Will NOT fit the new IRB-RET UL325-2018 units

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

• Kit includes photoeye with hood reflector with hood and mounting bracket
• Retroreflective configuration
• UL325-2018 compliant
• Six (6) monitoring interfaces
• 60 ft. operating range
• Easy installation and set-up
• Compatible with many operators

EMX Industries Universal Retroreflective Photoeye Nema 4X W/Reflector Hood New UL325

• Universal UL325 Retroreflective Photoeye Kit
• Compact design
• Easy LED alignment
• Easy-to-Adjust Ball & Socket Bracket
• Rugged NEMA 4X enclosure
• Integrated sensor hood improved reflector hood and ball & socket bracket
• Selectable Stealth Mode for security
• 1/2 inch conduit connection
• 60 ft. operating range
• Six monitoring interfaces
• Effortless installation and setup

EMX Industries Receiver Board Only for IRB-4X *** NLA

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

• Two sets of screws are required for each bracket installed

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

• For use with D-TEK detectors (most commonly used)
• Hourglass shaped

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

• For use with D-TEK detectors
• Special Order Only
• Narrow profile

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

• The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
• Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
• The LRS is equipped with our new DETECT-ON-STOPâ„¢ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
• Backwards compatible with CS303 sensors

EMX Direct Burial Sensor with 100 ft Lead Wire

• Lead probe ONLY. Requires the LRS-C1 detector
• Three-dimensional presence detection of vehicles
• Select X Y Z axis independently
• Stand-alone sensor
• Sensor stores ambient background and settings in non-volatile memory
• Includes direct burial sensor and 100 ft of lead wire
• PVC housing 5 conductor direct burial connection
• Power supply: 12-30 VDC
• Dimensions: 102mm (4.0”) x 27mm (1.0”)
• Use with Vehicle Detector Control Unit LRS-C1

EMX Direct Burial Sensor with 50 ft Lead Wire

• Lead probe ONLY. Requires the LRS-C1 detector
• Three-dimensional presence detection of vehicles
• Select X Y Z axis independently
• Stand-alone sensor
• Sensor stores ambient background and settings in non-volatile memory
• Includes direct burial sensor and 100 ft of lead wire
• PVC housing 5 conductor direct burial connection
• Power supply: 12-30 VDC
• Dimensions: 102mm (4.0”) x 27mm (1.0”)
• Use with Vehicle Detector Control Unit LRS-C1