LiftMaster CPS Interface Black Box (CPICARD)

• Allows CPS-U photoeyes to provide a 'NO' contact
• Interface is included with CPS & CPS-N4
• Also known as 041K4629 1C4489 41K4629 41C4489 CPI

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

• Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

Take-Up Reel 2-Wire Metal 18-ga 20ft

• 18-gauge
• 20 ft extended
• Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
• Also called Reel cord

LiftMaster Sensing Probe Free Exit 100ft Lead

• Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
• Can be installed above or below ground
• Connects directly to any gate operator without an external output board.
• Works with powered or solar gates.
• SPECIFICATIONS: Cable Lead Length: 100 ft.
• Power Requirements: 8-24 VAC oe 8-30 CSX
• Standby Current: 30-70uA
• Alarm Current: 30 to 40mA
• Enclosure Rating: IP67

Hercules Infrared Programming Remote Red (50-HERK-RC2)

• Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
• Bidirectional
• Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

Hercules Microwave Motion Detector for Industrial Doors

• Opens after sensing an object.
• Can be set up to detect vehicles separately from people and bring the two signals to two different outputs
• Or use the two outputs to differentiate between forward and backward movements
• Detection fields are adjustable - manually or with a remote control (sold separately)
• Can be mounted between 8.2' up to 23' with max range of 80'
• Reference height of 23' and angle of 45 degrees
• Detection field is 20' x 16'
• Requires 24-volt power supply separate from operator.

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

• Enclosed requires separate 24VAC power.
• Wiring harness with plug for detector included.
• OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
• Requires a loop of wire embedded in the ground to connect to the detector.
• Requires 2-wire output connection to door operator and 24VAC power
• Also known as: G50625S24

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

• Five feet long.
• OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
• The weight of the vehicle compresses an electric switch which sends an open signal to the door.
• Requires a 2-wire connection to the operator but does not require power to function

LiftMaster Treadle Protection Plate **discontinued

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

LiftMaster Elite Plug-In Loop Detector

• For use with Omni Control board available on the Chamberlain commercial line.

LiftMaster Commercial Protector System Eyes

• Universal commercial photo-eye kit for indoor use
• Interface box allows CPS to work with all operators
• 24 volt AC/DC supply voltage
• Mounting hardware included
• Sensing distance of 30 feet
• Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

LiftMaster Option Card with CPS-L Eyes

• For applications requiring two sets of photoeyes ( CPS-III)

LiftMaster 4-Wire Sensing Edge Interface

• Designed to provide advanced safety and security to the door system in commercial environments.
• This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
• This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
• A junction box not provided is recommend to protect exposed wiring.
• Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.

LiftMaster Electric Edge Card **to extent of inventory

• The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
• Same as Miller Edge SM-102

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

• Commercial Through Beam Photo Eyes includes:
• 50-15514 I/R Emmitter
• 50-15515 I/R Detector
• 77-16011 Hardware Kit N4-CPS
• 001C4629 CPI Housing Assembly
• Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998

LiftMaster Monitored Dual-Sided Photo Eyes

• For use with sectional or rolling doors.
• May be installed in areas exposed to rain or moisture
• Rubberized for more durability
• Will work on LiftMaster residential operators