LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

• Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
• It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
• Maximum recommended duty cycle: 10 cycles per hour.
• UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
• Heavy-duty 24V DC motor provides ultra-quiet operation
• Push button limit setting
• Compact design

LiftMaster Light Duty Commercial Dock Door Jackshaft Op.

• Ideal for commercial applications that require full vertical lift sectional doors with light-duty cycle requirements
• Works with myQ® Businessâ„¢ Facility to analyze and optimize productivity with intuitive control and monitoring capabilities.
• LMi5 Interface monitors up to 5 external sensors enabling the DOCK DOOR SESSIONS feature in myQ business facility and visualization of productivity at the dock.
• MyQ® Technology enables monitoring and control of the facility operators through a mobile app.
• Built-In Wi-Fi® for simple operator internet connection.
• Opens 50% faster in the up direction.
• Security+ 2.0® safeguards facility access with rolling code technology opening for registered devices only.

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

• Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
• These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
• The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
• DJ operators are attached to the door jackshaft to indirectly drive the door.
• MyQ® Technology
• Security+ 2.0®

GDI Chain Per 2 ft Length

• If over 10' loop length is required

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft UL-325 Photo Eyes Extra

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft UL325 Photo Eyes Extra

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft UL325 Photo Eyes Extra

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft Non Monitored

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft Non Monitored

• Compact & Light Weight - Fast Installation
• Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
• Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
• One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
• Soft start soft stop
• Includes cycle counter timer-to-close 10ft motor wire harness
• Battery backup optional (sold separately)

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

• Low Headroom at 4-3/4" (Trolley)
• Dimensions: 11.35" x 4.3" x 4.3"
• Motor type: Brushless DC
• Max cyles: Open/Cose per day = 3200
• One operator can handle all AC voltages - Single phase and three phase
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

• Low Headroom at 4-3/4" (Trolley)
• Dimensions: 11.35" x 4.3" x 4.3"
• Motor type: Brushless DC
• Max cyles: Open/Cose per day = 3200
• One operator can handle all AC voltages - Single phase and three phase
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

• Low Headroom at 4-3/4" (Trolley)
• Dimensions: 11.35" x 4.3" x 4.3"
• Motor type: Brushless DC
• Max cyles: Open/Cose per day = 3200
• One operator can handle all AC voltages - Single phase and three phase
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 Non Monitored

• Low Headroom at 4-3/4" (Trolley)
• Dimensions: 11.35" x 4.3" x 4.3"
• Motor type: Brushless DC
• Max cyles: Open/Cose per day = 3200
• One operator can handle all AC voltages - Single phase and three phase
• No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

GDI Side Mounting Bracket N/C When Ordered w/Operator

GDI Direct Drive HC410 Nema 1 To Accept 1" Shaft; UL-325 Photo Eyes Extra

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

GDI Wiring Harness Length Per Foot G3343

• If over 10' is required